hey, I want to see ppls cmd line and plz write what client you use so we get enough info..




btw I dont know shit what some stuff mean or do there, I just got the cmd line from a friend and used it!!

I got acceleration in my mouse when I play, so -noforcemaccel dosnt work right?

8)

a piece of beauty right there, almost geek pr0n(!)

what does -snoforceformat do ?

-snoforceformat
This switch will disable the forcing of the soundcard into the appropriate sound
mode.
Note: When this parameter is used the game will not try to force the sound card
into the 11,025Hz at 16-bit stereo sound mode. Use this parameter if you
are having problems with the sound initialization for your sound card.

I added -snoforceformat cuz smtimes i got problems with my soundcard... dunno if will solve it...

edit: seems vid_displayfrequency 75 default to everyone?

I'm surprised so many settles for 75Hz as it is not difficult to set 77Hz/77fps for smooth gameplay.

"Couldn't set fullscreen DIB mode"

You need to add a 77Hz custom resolution (nvidia). Check help section, I put step by step instructions there.

it seems more smooth at 77hz/77fps than 120/77
ty blAze...

You're welcome. If your monitor can take it, you could try 2x77=154Hz so that for every frame your monitor refreshes exactly twice, but 77Hz seems ok for me at least.

@ezquake-gl.exe -norjscripts -noforcemaccel -zone 4096 -m_mwhook -dinput -ruleset smackdown +m_rate 500 -mem 64 -width 1024 -height 480 -bpp 32 +set vid_displayfrequency 77 +match_auto_record 1 +gl_smoothfont 1 +gl_consolefont "trinca"

fuhquake.exe -mem 256 -nomp3volumectrl +set cl_confirmquit 0 -ruleset smackdown +cfg_load dm -m_mwhook -noforcemparms -dinput -m_smooth -norjscripts

mem 24 -zone 512 -width 640 -height 480 -conwidth 320 -conheight 240 +set cl_confirmquit 0 +set vid_displayfrequency 120 -ruleset smackdown -democache 30720 -m_smooth -m_mwhook -particles 0 -norjscripts +cfg_load hanggl.cfg

disc@disconnect ~ $ cat ~/qw/ezqrun
#! /bin/sh
cd /home/disc/qw/
export __GL_SYNC_TO_VBLANK=0
export __GL_FSAA_MODE=0
export __GL_DEFAULT_LOG_ANISO=0

xinit /home/disc/qw/ezquake-gl.glx -ruleset smackdown -mevdev /dev/input/event1 -mmt -rtctimer -norjscripts -width 800 -height 600 -conwidth 400 -conheight 300 -mem 64 +cfg_load disc -- :1 -config qw.conf

P.S.
+m_rate 500 - useless, it did nothing. just run client, m_rate 500, cfg_save (hi sassa, trinca)
-noforce* - useless with -dinput (hi sassa, trinca, lib)
and m_rate useless without -dinput -m_smooth (hi Sassa , trinca)
there are no -nocdaudio for fq/ezq (hi zaiko)
you can set vid_vsync at your cfg (hi zaiko)
+match_auto_record, +gl_smoothfont, +gl_consolefont - useless, put it in your cfg (hi trinca)
-m_smooth useless withut -dinput (hi hangman)

^^^^^
that was me. forgot to login

Sure it was, attention whore.



... although I'm gonna try out that 154 Hz thing now. Stay tuned for more info! o/

ezQuake-gl build 1144 on Linux

**************************
qpath="/home/mursu/quake"
width=640
height=480
username="mursudm"

amixer -c 0 cset numid=8 0% (to make sure my gamesounds dont echo on teamspeak)
setxkbmap us
/usr/X11R6/bin/numlockx off
xset m 1/1 1280 (to get rid of acceleration)
xset s noblank (to get rid of screen blanking once in a while)

ezquake-gl.glx -bpp 32 -conbufsize 4000 -conheight $[$height/2] -conwidth $[$width/2] -democache 30000 -dinput -fullscreen -height $height -mem 32 -mevdev /dev/input/event0 -mmt -nodga -noforcemaccel -norjscripts -rtctimer -ruleset smackdown -sndbits 16 -sndstereo -width $width +set cl_confirmquit 0 +set cl_independentphysics 0 +cfg_load $username +connect $*
**************************

-dinput - is there dinput for linux? =:-)
-noforce* - useless for linux
-snd* - only for linux/OSS, ezQuake 1318 supports ALSA and uses it by default, so -snd* have no power

Mursu - is it possible to "alt-tab" for you? I use KDE and it seems it dont like qw clients - i cant alt-tab from them. Thats why i run ezQ on separatet X :E

Diki is a friend of mine and he is totally obsessed with tweaking mouse settings and i got nearly beat up by him because i didnt have -dinput
No really, i didnt know, thx disconnect

1318 is not allowed in EQL so i use those OSS options on commandline.

Its not possible to 'alt-tab' for me either
disconnect: Have you noticed that in KDE shift+scroll Lock toggles between two different functionalities for the numpad.
1: Normal functionality
2: Numpad controls the cursor like a mouse
I wonder how i could permanently make it use the normal functionality because it seems that the second functionality is activated once in a while and as I use numpad for entering times for quad, pent, rl etc (mm2) it is quite annoying. When this second functionality is enabled - none of numpad keys work as they should.

Ok, I have tried the 154 Hz thingy now. At first it felt a bit strange, but after getting used to it I have no wish to go back to the way it was before (120 Hz with vsync). Haven't tried 77 Hz since my monitor handles 154 well. Great tip, thanks blaze!

what was -dinput and -m_smooth for again? i have this stuff on my cmd line but i don't even remember why :rolleyes:

-dinput
This switch enables the use of DirectInput. This is necessary when using
Advanced Mouse Smoothing for example.

-m_smooth
This is meant to smooth your mouse movements and maximize mouse responsiveness.
If you're unlucky and cannot get rate 200 with your mouse/windows/drivers, and
don't want to use m_filter, because of the latency it brings to your movements,
then this is for you. However, also if you have a smooth mouse with 200 Hz
sample rate you can give it a try.
Requirements:
-dinput in your command-line.
-m_smooth in your command-line your mouse rate must be at least as high as the FPS you play at, or your mouse will still move roughly (if you use PS2 mouse and Win9X try ps2rate).
-m_rate must be set to your mouse rate (use "m_showrate 1" if you are not sure).

gl fuh -width 320 -height 240 -bpp 32 +exec cfg/insane.cfg -zone 4096 -heapsize 64000 -dinput -noforcemaccel -noforcemspd +set vid_displayfrequency 77 -ruleset smackdown

B<>

120fps/120Hz

+cfg_load P3 -height 480 -width 640 -conwidth 320 -conheight 240 -bpp 16 -ruleset smackdown -norjscripts -mem 128 +set vid_displayfrequency 138 +set s_khz44

just added the pak from quake resampling project, sounds great

fuhquake-gl.exe" -width 640 -height 480 -conwidth 320 -conheight 240 -bpp 16 +set vid_displayfrequency 75 +set cl_confirmquit 0 -ruleset smackdown -norjscripts -dinput -m_smooth

i have a prob i cant had anything more to my command line it dosent let me write i wanted to add -particles 0 ;(

Just make a batch file

open notepad, paste your command line (fuhquake-gl.exe...) and save it in your quake dir but with *.bat extension, not *.txt

And now you can type more in your cmdline Hope it helps.